Mother's Indoor Climber
(Page 2 of 2)
Tower Rail Detail
Top View
Side View
RELATED CONTENT
TOTAL-CONTROL Indoor Gardening with MODERN HYDROP October/November 1998 GARDEN & YARD By John Vivia...
THE INSIDE SCOOP ON INDOOR AIR
December/January 1998
BITS & PIECES
By Destinée- Chariss...
Here's and easy-to-build, rainy day home project that can save you both money and energy to the poi...
A Fair Exchange February/March 2001 If you have a newer, more airtight house, the indoor air may on...
The version we're showing here is our economy model—not the cheapest possible but one that accents durability over exotic materials. The first climber we built was framed in clear fir coated with tung oil, and the slide was birch plywood slickened with bowling alley wax. It was truly attractive . . . until its proud new owner decorated it with an indelible marker.
We used 5/8" plywood on the climber shown, because it's only a couple of dollars more than 1/2", and it yields a convenient 3/4" thickness when combined with 1/8 " Masonite. Likewise, the 1 3/8" closet rod isn't necessary for strength; it's just less costly than dowel. The 2 X 4s are framing lumber, but it would have been nice to have something a little better when the time came to rout the edges. Knots and rounding-over bits don't mix well.
LIST OF MATERIALS:
(1) 2X4X8'
(4) 2X4X12'
(1) 1X2X4'
(1) V" X 4' X 8' B-C Plywood
(1) 4s" X 4' X 8' Tempered Masonite
(2) IV' X 8' Closet Rod
(1) 1's" X 10' Closet Rod
(1) 1/4" X 3' Dowel
(3) No. 10 X 1'/2" Wood Screws
(2)'b" X 4" Carriage Bolts and Wing Nuts
Page:
<< Previous 1 | 2 |