MORE ON MAKING SNOWSHOES
(Page 2 of 2)
When choosing your lacing
material—either rawhide or neoprene—keep in
mind, Carl tells us, that the former will prove
best for dry snow, while the latter is a better "all
condition" lacing. (Rawhide will become stretchy
and soak up water in wet weather, but not so badly that it
can't be used under such conditions.) And when lacing
rawhide, do stretch the material, but use common sense and
don't apply too much force. (Incidentally, those
of you who decide to fashion your own bindings rather than
purchase them ready-made can take a few tips from the
traditional native American bindings pictured here.)
RELATED CONTENT
Snowshoeing is a low-cost winter sport that requires little investment, especially for those who ar...
Traversing snowy terrain in the Native American style, including diagrams, framing, construction...
Here's how Tom Russell made his own snowshoes from natural materials and labored through several tr...
Jerky is a classic camp and trail food, and by making it yourself, you can experiment with meats an...
As you
walk in your snowshoes (you'll probably want to wear them
with high-top moccasins and wool socks in dry snow . . .
felt pack or good leather hiking boots will serve under
most conditions), be careful not to allow one shoe to step
on the other, and remember never to let a snowshoe
"bridge" between two high points.
That's about that. MOTHER
would like to thank Carl for taking the time to provide
this additional information . . . and to wish you
all many happy trails through the winter woods.
Page:
<< Previous 1 | 2 |