A European-Style Clothespin Apron
(Page 2 of 2)
March/April 1979
By the Mother Earth News editors
Step 7: Place each pair of apron-string pieces together, wrong sides out, and sew them to each other as shown in Fig, F, leaving one end of each string open. Trim the excess material from the seams and turn the tubes right side out. (A knitting needle or similar long object pushed through the fabric "cylinder" would make this job easier.) Iron the ties flat, insert the edges into the open ends of the waistband and sew them in place, going over the seam two or more times for strength.
RELATED CONTENT
Paper or Plastic?
December/January 2000
You've heard the question a hundred times. Whether y...
How to make the most basic shoe repairs....
Clinton says next month's Copenhagen talks unlikely to produce binding climate treaty...
Using junk fuels and a metal oil drum to make a water heater for laundry....
Make beautiful, easy-to-make floorcloths from canvas with these simple instructions and design idea...
Step 8: Fold the "long" edges of the hang loop (Fig. G) in to the center, and then crease the piece down the middle, enclosing the cut sides. Sew the loop lengthwise several times, and then pin its ends—with the cut edges turned under— so that the loop is spread (horizontally) across the center point of the waistband, and stitch the little strap firmly in place.
That's all there is to it! I usually wrap the apron strings around me once and then tie them in front ... to keep the heavily loaded apron from sagging. Of course, even this handy little piece of clothing won't guarantee that you'll enjoy every washday, but it'll sure make the work go more quickly!
Page:
<< Previous 1 | 2 |