BUILD THIS FOOD GRINDER STAND
Although it's dang near impossible to run a real do-it-yourself kitchen without frequent recourse to a food grinder . . . the actual use of one of the implements, more times than not, is a royal pain. For at least two reasons:
RELATED CONTENT
Lifestyles Food Digest...
UN food agency says 1 billion people hungry, poor paying more for food despite recession...
Here’s a new way to bring together coalitions that are working toward the promotion of locally grow...
Food Co-ops: Good Food and Good Prices September/October 1979 A "New Wave" of grocery outlets can g...
CITY FOOD/COUNTRY FOOD February/March 1998 By Joe Novara Maybe food really should be shrink-wrapped...
First, these handcranked appliances almost always have to be clamped to something before you can use them. And the only "something" that most of us can clamp a grinder to without worrying about the resulting scars is generally a bench out in the shop or on the back porch somewhere. Which is awkward. And, sometimes, dirty.
Second, every dad-ratted food grinder in the world— it seems — has been cleverly designed so that its delivery spout just isn't quite high enough off the table for your favorite bowl to slide under. Right? Right. And besides that, have you ever tried to process something juicy-such as apples-through one of these little machines? And had all that juice seep out the bock of the grinder? Of course you have. Irritating, ain't it?
Well, MOTHER researcher Clarence Goosen has the answer to both those problems. . . in the form of a great little mid-winter shop project that you can whip together from odds and ends in almost less time than it takes to talk about it.
The handy-dandy Food Grinder Stand you see here has a base made from a 13-1/2" X 13-1/2" piece of 3/4" plywood. Two pieces of yellow pine (each measuring 7-1/2" X 9") were used in its sides, and its top started life as a 1" X 3" X 13-1 / 2 " stair tread. Two corner brackets, twelve 1-1/2" wood screws, twelve 1/2" wood screws (used to attach the corner brackets), and a small amount of glue (in each joint) were also used in the project.
If your shop is run the way we run ours (every scrap of leftover lumber that can be saved and used another day is), the chances are good that you already have everything you need to construct one of these stands. Or you can (with permission) scrounge through the scrapbox at the local lumberyard or cabinet shop. One way or another, you shouldn't have to spend more than a buck or two of "fresh" money on this project.
